Projects

Customer Issue: Mr. Daniel felt overwhelmed with options for his new garage door, and wanted suggestions based on his needs.
Our Solution: Our team felt that a Clopay Canyon Ridge model garage door combined beauty with energy efficiency, which would make it a stylish and useful fit for Mr. Daniel’s home. We got the door onto the tracks and closed them around the rollers. Our experts then adjusted the tension and balance once the springs and cable were connected. We carefully set up the safety sensors as well.

Customer Issue: The customer’s garage door was opening slowly and noisily, more and more so as time went by. She finally decided to call for help.
Our Solution: It didn’t take us long to determine that the garage door tracks had been loose for some time, and been badly warped and bent during use because of this. After informing the customer, they took the door off and replaced both tracks before oiling them and reinstalling the door.

Customer Issue: The customer noticed strange and troubling behavior from her door during its operation.
Our Solution: Our team looked into every subsystem of the customer’s door, including sensors, electric opener, and spring lift mechanism. They repaired the damaged tracks that were causing the problem, and also caught a torsion spring that was near breaking and installed a replacement.

Customer Issue: Broken torsion spring.
Our Solution: We first disconnected the opener before removing the broken spring took and replaced both torsion springs with a stronger set. We realigned and balanced the door, tightened all bolts and tested the door to make sure it was working properly.

Customer Issue: Non-functioning door opener.
Our Solution: Our technician found that Mr. Collins' door opener had suffered an electrical surge. He replaced the circuit board, tightened all bolts, lubricated and tested the door to ensure proper operation.

Customer Issue: Required a new opener.
Our Solution: Mr. Phillips decided on a new Chamberlain 1-1/4 HP smartphone-controlled chain drive opener with battery backup. After installation we tested the door's operation to make sure the new opener was working properly.